Kinedyne® #423021 Winch Strap – Flat Hook, 4″ x 30′, 16,200 lb. Capacity

Manufacturer #: 423021 SKU: 51332 contact us for a quote

Add item to your cart; click « VIEW CART » then click « SUBMIT A QUOTE REQUEST »
or call 1.888.333.1929

$0.00

Heavy-duty Winch Strap that can reliably tie down your cargo with a working load limit of 5,400 Lbs.

The heat-treated carbon steel Kinedyne® 1021 Flat Hook end fittings are designed to attach to most tie down points found on vehicles and trailers in order to securely anchor your tie down. The Flat Hooks are coated in an electro coat paint finish in order to protect the end fittings from corrosion, increasing their durability against some of the tougher conditions.

Flat Hook end fitting comes equipped with an Abrasion Clip, a round piece of metal on the inside of the hook that helps protect the strap from wearing out at that point of contact with the hook.

The Kinedyne® Winch Straps comply with CVSA, CHP, WSTDA, North American Cargo Securement standards, and DOT regulations and have the Kinedyne® name and logo as well as the working load limit labeled on the tags and the straps. The Capacity Indicator Line designates that two red lines represent 6,000 pounds per inch across webbing.

Specifications:

  • Working Load Limit: 5,400 lbs (2,450 kgs)
  • Breaking Strength: 16,200 lbs. (7,348 kgs)
  • Width: 4″
  • Length: 30′
  • Weight: 5 lbs.
  • End Fitting: Flat Hook with Abrasion Clip

* All images displayed are for illustrative purposes only and may not be an exact representation of the product

All Kinedyne® ratchet straps are rated as a whole assembly (not the individual components) and are Tagged and Stenciled in accordance to North American Regulations: Manufacturers Name, Working Load Limit in Pounds and Kilograms.

The Difference between Breaking Strength and Working Load Limit is: Breaking Strength refers to the point in which the tie-down you are using is going to fail. Working Load Limit is the maximum allowable load assigned to each tie down by the manufacturer which does not to exceed one-third of the complete assembly breaking strength.

WARNING: Series E, A or F fittings are designed for use with Kinedyne Logistic Track. Load ratings may be reduced when used with other tracks or if the track fitting is not positively engaged. Your cargo control system is only as strong as its weakest link. All ratings for series E and A fittings are based on use with Kinedyne 11 gauge track. NOTE: Several types of Kinedyne track are not made with 11 gauge steel, contact Customer Service for specifications by part number.